It’s jamming J and J but only to tray 1 of the FS finisher, which is the print tray for this customer. This issue is kicking my ass, im sure someone here has ran into this? I’m gonna still look for those sound dampness, I just have to figure out exactly where those are located! Get the Android App. We had cleaned and lubricated bushings, changed the solenoid that operates the “moveable” part, and it still did it.
|Date Added:||28 May 2013|
|File Size:||62.90 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
I guess the important part of all this is that this basic KM finisher hasn’t changed much in 10 years, so watch for this. While it does only occur to tray 1 of this fs, it’s only when sending staple jobs This issue is kicking my ass, im sure someone here has ran into this?
The time now is Bizhub FS Jamming–Stapled bjzhub only, J or Everytime Maybe its the 2 one way gears on the front of the finisher, and shafts. Things I have done: I still feel pretty outwitted on this issue Has anyone ever had luck fixing intermittent finisher jams with a new fnscb? We had cleaned and lubricated bushings, changed the solenoid that operates the “moveable” part, and it still vizhub it. In between the lower surface operated by the solenoid, and the upper surface run by the cam and motor is a couple spongy sound damping pads that had gotten quite mushy and sticky.
I am running out of ideas, if someone could point me in the right direction It would seriously make my week! The first visit I removed 1 jam, then ran duplex pages to tray 2, the copy tray. Tags for this Threadbeltbizhubcodeserrorfinisherfsjjstaple. It doesn’t even click when operating. Oh, and only after it has sat idle for an hour or so.
BizHub Copier by Konica Minolta Valuation Report by
Of course it didn’t jam. I have an extra one I’m gonna try tomorrow just to say I have.
It was pretty clear that the Nip Moveable Section KM-speak for that mouth at the exit that cams open and closed as needed was sticking in some way. Always after sitting an hour or more, always tray 1.
After 6 visits the FS made it back to the shop, and with some regular prodding we saw it jam a few times. If you’d like a serious answer to your request: Results 1 to 6 of 6. Get the Android App. Details vBulletin Mods by vBSocial.
Thanks for the reply Blackcat While good to know, that’s not the same issue I’m having Bookmarks Bookmarks Digg del. I’m gonna still look for those sound dampness, I just have to figure out exactly where those are located! It’s jamming J and J but only to tray 1 of the FS finisher, which is the print tray bizjub this customer.
We just scraped off the pads. That board controls a lot of the timings related to the stacking operation. Punching and straight thru tray 1 is flawless everytime. Originally Posted by solidzdawg.